Heera Semi Automatic Screen Filter

• Semi Automatic Screen Filter is ISI Certified Product.
• Semi Automatic Screen Filter is made with engineering plastic so it does not easily get rust.
• Semi Automatic Screen Filter cleaning required the flow of water i.e. no need to cut off the water supply in the filter.
• No need to open the Semi-Automatic Screen Filter to clean the filter from inside.
• Semi Automatic Screen Filter’s Body is made with Special Chemically-Bonded Polymer For Long-Durability.
• Semi Automatic Screen Filter content Non-Corrosive SS-316 Stainless Steel Filter Mesh for better cleaning.
• Semi Automatic Screen Filter is Easy To Install & have Low Maintenance cost.

 Semi Automatic Screen Filter Cleaning Instructions 

• Semi Automatic Screen Filter’s cleaning must be done when the pressure differential across the screen reaches 0.5kg/cm² (7psi) or when the pressure indicator red button pops up.
• Cleaning The Semi-Automatic Filter must be done while the filter is under pressure of water flow.
• Open the Drain Valve of filter gradually, to discharge the drain.
• Rotate the handles gripper in the clockwise direction 4-5 times and then rotate in an anti-clockwise direction to finish the process. This is to be done when the system is on.
• Close The Drain Valve Gradually as it is a closed position.
• In case the filter is still clogged (Pressure Indicator Button is Up.) repeat the above-mentioned process while the downstream valve of the filter is closed.